Posts

POm pom

 Lithium polymer batteries have the same technology that is used by liquid lithium ion batteries. In other words, the anode and cathode are of the same type. The only difference is that these units use aluminum plastic film and gel electrolytes. Therefore, these power packs are thinner and lighter but offer a higher density of energy. In this article, we are going to talk about 10 advantages of these power packs. Read on to find out more. 1. High Energy Density Compared to nickel-hydride or nickel-cadmium, lithium-polymer batteries are 50% lighter. But they have the same degree of energy density, which makes them an ideal choice. 2. Thin Design Liquid lithium-ion battery features a customized shell and positive/negative electrodes. And then there is a technical limit that doesn't allow the batteries to be thinner than 3.6mm. On the other hand, the polymer cells don't have any such limitations. Therefore, the thickness of these units can below 1mm. 3. Low Internal Resistance Un...
Post a Comment
Read more

NiMH Batteries: Back to Basics

 As far as eco-friendliness is concerned, Nickel Cadmium cells and batteries are your best bet for a number of reasons. Also known as NiMH, these units are known for their optimal performance. Like Nickel Metal Hydride, they offer almost the same charge and voltage features. Therefore, they can be used in place of each other. However, there are a couple of differences to take into account. In this article, we are going to find out more about this technology. Read on to find out more. First of all, these power packs are your best bet if you are looking for something environmentally friendly. Therefore, they can be used in place of D, C, AA ones. NiMH Battery Technology: Some Basics The good thing is that NiMH cells and batteries are used across the globe for a number of reasons. The reason is that they have several great features. Given below are some of the primary features of these power packs: 1. Environmental Impact First of all, NiMH runs circles around NiCd batteries as they ...
Post a Comment
Read more

Nickel-Metal Hydride)

 NiMH stands for nickel-metal hydride and they are on the list of the most common batteries that can be recharged. Since they have great chemical properties, they are a good alternative to nickel-cadmium ones. The good thing is that NiMH leaves out cadmium and has no memory problems, unlike NiCD. This is what makes them an ideal choice for consumer electronics. Also, compact high-powered methods are used in the making of these power packs. In this article, we are going to share a few tips that will make it easier for you to use NiMH batteries . 1. The Classifications Usually, nickel-metal hydride power packs contain several single units connected in series. Unlike lithium-polymer ones, NiMH ones are much safer to use. Each battery has a rated voltage of 1.2V. Irrespective of the physical size, the rating on each unit is 1.2V. As a general rule, the bigger the battery pack, the bigger the mAh. As said above, these power packs are an ideal choice for less than 30 days. You may have ...
Post a Comment
Read more